Probably, allow a ~10% window of error. Exact power input is a difficult thing to calculate as it's impedance dependent, and the impedance is frequency dependent. 8/16 ohms is a nominal or average rating on a driver. The acoustic load(horn) and frequency will determine actual impedance seen by your amplifier.Was I really only putting in 1.5 watts at -18db?
Pascalites and an XO of 800hz or higher, 1200 would be preferred, at least 2nd order.I'm aiming for a 120db system to allow close to reference levels at 45 feet for home theater usage.
Pascalites.I hear them, muted pretty much, but the "sizzle" for lack of better word is missing.
Likes me some Ashly's, got a short stack of em here.I'm using an Ashly FET-200
Bookmarks